Skip to main content

EICR – Codes in more detail

EICRs are graded as satisfactory or unsatisfactory rather than pass or fail.  However, to be clear an unsatisfactory test is a fail when it comes to letting out a property for tenants or paying guests and any unsatisfactory issues need to be fixed before doing so.

Every EICR should have a summary near the front of the report highlighting any issues and the report should clearly state the satisfactory or unsatisfactory grading – usually on the front sheet.

There is then a more detailed report which will show exactly where any issues have been found and need action.

The gradings are C1, C2, C3 and F1.

Any CI, C2 and F1 issues found will classify the inspection as unsatisfactory and will need the issues fixed.

C3 issues do not need immediate action and a property can continue to be let but it could lead to a bigger issue later.

The good news is you don’t need a full new EICR after any remedial work as each piece of work will be certified in its own right and have its own certificate. This should then be retained with the main report to show compliance and that issues have been addressed.

The codes in more detail

C1 – Danger Present. Risk of Injury. Immediate action required.

This is the highest priority code used in an EICR inspection and means there is a risk of fire or an electrical shock.  It should be made safe as soon as possible.

C1 codes can include findings such as exposed live wires, broken light switches or sockets

These either need to be repaired, fully isolated or taken out of use.

C2 – Potentially dangerous. Urgent action required.

One step down from the C1 code but still a significant hazard and needs to be made safe.

C2 codes can include earthing issues or an RCD that does not trip when tested.

C3 – Improvement recommended.

This usually means that part of the electrical installation does not meet current wiring regulations although there is no immediate danger.

C3 codes can include the location of a plug socket which could potentially cause damage to a plug or flex or be situated in an unsatisfactory area.

C3 are advisory and the report can still be deemed satisfactory but can lead to further bigger issues later.

FI – Further investigation required.

This code means the electrician has identified an issue but it needs further investigation to ensure it is safe.  Following further investigation the issue can be graded appropriately.  It may require further specialist advice or just more time (maybe when a premises is unoccupied).

Examples include unverified circuits within the system or emergency lighting is very low output.

 

Comments


  1. Grounded EICR provided outstanding EICR Cambridge .Their team was incredibly professional, thorough, and efficient, ensuring all our appliances were tested to the highest safety standards.If you're in Cambridge and need reliable EICR Services, I highly recommend Grounded EICR for their expertise and excellent service!

    ReplyDelete

Post a Comment

Popular posts from this blog

Fire Safety and Portable Heaters

Portable heaters can be an effective way to heat a room without heating the whole house or when the property doesn’t have the benefit of a central heating system, however they can also pose a serious fire hazard when not used carefully.   This is especially true when being used by people unfamiliar with a premises. Some general rules for Portable heaters Always use on a flat surface Leave at least 1 meter clearance to furniture and curtains. Buy one with a trip switch in case it gets knocked over (ie. By the dog). Never cover your heater or use to dry clothes. Never use a faulty heater. Types of Portable Heaters Oil filled radiators – Relatively low risk These are often on wheels and are quite heavy so less likely to be knocked over. They don’t have any exposed heating elements so are less likely to ignite anything.   They take a while to heat up, but retain the heat for longer.   They can have timers and thermostats to help control the heat. Electric Co...

Thumb Turn Locks: A Practical Guide for holiday home owners (and anyone else)

As a holiday homeowner the safety of your guests will be paramount you want them to have a great time and you want them to have a safe time. When it comes to fire safety, small details can make a significant difference. To be able to open a final exit door easily is a requirement for sleeping accommodation.  C onsidering the appropriate means of escape is a fundamental part of any  holiday home fire risk assessment. The scenario Most people have a night time routine which often involves locking all doors, and in a significant number of cases removing the key to a regular spot nearby.   It becomes an automatic process. So imaging waking in the middle of the night, in an unfamiliar place, disorientated from waking suddenly to a screeching smoke alarm, maybe impaired by a few whisky’s (we are in Scotland after all).   You open the bedroom door and can smell the smoke; adrenaline surges and you dash down stairs for the front door.   It’s locked and there’s no key, ...